| |
US
Sailing Basic Keelboat Certification
Purpose
To responsibly skipper and crew a simple daysailing keelboat in
familiar waters in light to moderate wind and sea conditions.
Classes are taught aboard our J 80 which is a 26-foot keelboat with
tiller steering.
Prerequisite
None
J World classes to obtain Basic Keelboat
certification
Learn to Sail - Five Day five days
Learn to sail - Three weekends
Advanced Boat Handling - with previous experience
Curriculum Overview
The Basic Keelboat graduate will have successfully demonstrated the
ability to responsibly skipper and crew a simple daysailing keelboat
in familiar waters in light to moderate wind and sea conditions.
Recommended Equipment: It is recommended that Basic Keelboat
Certification courses and examinations be conducted on 18’ to 27’
daysailing sloop-rigged keelboats with tiller steering and with
adequate equipment inventory to complete all required certification
outcomes.
Prerequisite: There is no prerequisite for Basic Keelboat
Certification.
Certification Requirements: Basic Keelboat Certification requires
the successful completion of the following knowledge and skill
requirements. These requirements are expected to be able to be
performed safely with confident command of the boat in familiar
waters with a wind range of 5 to 15 knots. Some regions may have
stronger prevailing conditions, which are acceptable if the
candidate can safely control the boat and be aware of his or her
limitations in these conditions. The certified candidate will be
able to skipper a tiller steered keelboat up to 27 feet in length.
Practical Skills
Preparation to Sail:
1. Demonstrate ability to recognize and forecast prevailing local
weather conditions.
2. Demonstrate how to properly board a boat.
3. Perform a presail check for the boat’s flotation integrity,
safety and legally required equipment, and crew indoctrination.
4. Demonstrate the proper rigging of the sails, halyards, sheets,
blocks, and winches.
5. Check all other equipment specific to your boat not indicated
above.
Crew Operations and Skills:
6. Demonstrate how to put on a Personal Flotation Device (PFD).
7. Demonstrate tying and use of knots: stopper knot, bowline, cleat
hitch and sail lashing knot.
8. Demonstrate the use of these sail controls: halyards, sheets,
cunningham/downhaul and outhaul.
Leaving the Dock or Mooring:
9. Demonstrate appropriate helmsman and crew coordination and skills
for departure suitable to the conditions: raising sails, line
handling, casting off and boathandling.
Boat Control in Confined Waters:
10. Demonstrate in close quarters under sail: starting, stopping,
speed control, tacking, jibing, steering control, sail luffing, the
No-Go Zone, getting out of irons, backing the jib, and crew
coordination and communication.
11. Demonstrate sailing a predetermined closed course and
maneuvering around obstacles.
Navigation (Piloting):
12. Point out Aids to Navigation in the harbor and local waters that
you are sailing, and respond accordingly.
Navigation Rules, International-Inland:
13. Demonstrate use of Navigation Rules while sailing.
Boat Control in Open Water:
14. Demonstrate proper sail trim with accurate sheet adjustment of
the main and headsails. Make use of the sail telltales and identify
points of sail.
15. Perform a heaving-to maneuver per the prescribed method.
16. When appropriate, demonstrate sailing "by the lee" and explain
the inherent dangers involved.
Heavy Weather Sailing:
17. Demonstrate how to reef and/or depower sails.
Overboard Recovery Methods:
18. Properly demonstrate one of the overboard recovery methods,
which is most appropriate for: your sailing ability, boat type, crew
experience, wind and sea conditions, and maintaining constant visual
contact with the victim.
Safety and Emergency Procedures:
19. Explain the proper procedure for using an approved distress
signal.
Returning to the Dock or Mooring:
20. Demonstrate appropriate helmsman and crew coordination and
skills for arrival under sail and/or power suitable to the
conditions: boathandling, deploying fenders, stopping, tying up and
lowering sails. Explain at least two different approach plans for
other conditions.
Securing the Boat Properly:
21. Demonstrate stowing of sails, rigging and equipment. Thoroughly
clean the boat, and install any covers.
22. Check both the electrical and bilge systems for dock operation
if required.
23. Check the locks on companionway, lockers and hatches. Make a
final check of docklines, spring lines and fender placement.
Knowledge
Preparation to Sail:
1. Describe personal preparation such as clothing and sun
protection.
Crew Operations and Skills:
2. Be familiar with the nomenclature for basic parts of the boat,
sails, battens and rigging.
3. Describe the proper use of Personal Flotation Devices (PFDs) and
throwable flotation devices.
4. Describe the use of sail controls.
5. Explain potential electrical hazards such as overhead electrical
wires and lightning.
Sailing Theory:
6. Describe basic sailboat design, sail theory and boat dynamics.
7. Explain how to read the wind and determine all points of sail.
8. Understand what is meant by the term "sailing by the lee" and
explain the inherent dangers involved.
Leaving the Dock or Mooring:
9. Understand the effects of wind, tide and currents in relation to
the boat and surrounding area while preparing to get underway.
10. Describe the differences and alternatives for leaving under sail
and/or power in upwind, crosswind and downwind situations.
Navigation (Piloting):
11. Be familiar with basic chart reading specific to your local
waters.
12. Describe Aids to Navigation: buoys, daymarks, regulatory
markers, and other markers specific to your local waters.
Navigation Rules, International-Inland:
13. Describe the Navigation Rules, International-Inland, for
Stand-On and Give-Way sailboats and powerboats for collision
avoidance and understand your state and local boating regulations.
Heavy Weather Sailing:
14. Describe weather warning sources.
Overboard Recovery Methods:
15. Understand the Quick-Stop and Quick-Turn overboard recovery
methods to include: constant visual contact with the victim,
communication, recovery plan, sequence of maneuvers, boathandling,
course sailed, pickup approach and coming alongside the victim (or
simulated object).
16. Describe methods of getting an overboard recovery victim back on
deck after the vessel is stopped alongside.
Safety and Emergency Procedures:
17. Be familiar with treatment of victims of overheating,
hypothermia and seasickness.
18. Describe the use and regulations for flares.
19. Be familiar with at least six different distress and emergency
signals per Navigation Rule 37.
20. Be familiar with the U.S. Coast Guard requirements for safety
equipment.
Anchoring Techniques:
21. Be familiar with anchoring procedures for emergency situations
such as loss of boat control, sudden storms, prevention from going
aground or injured crew situations.
Returning to the Dock or Mooring:
22. Describe the differences and alternatives for arrival under sail
and/or power in upwind, crosswind and downwind situations.
|
|
